The application of diamond tools in the processing of stone

The application of diamond tools in the processing of stone

 

There are a variety of methods for stone flower processing: the use of the most formed milling wheel (by the die), suitable for a relatively narrow flower;Circular saw blade will cut the stone into strips, with milling wheel milling shape, suitable for wide and narrow line production;Cut with diamond beaded saw, suitable for larger thread.In addition still has the stone material processing center and so on several kinds of flower thread processing method.The three commonly used ones are described below.
1, with the formation of milling wheel direct processing.This is the processing stone flower thread use the most, is also the most economical, the processing efficiency is the highest method.It is faster for the shape of the line with little bump.This needs to be made beforehand and the milling tool that wants to process line concave and convex contrary, grind a curve to come in stone material line machine, grinding wheel should prepare coarse grind, fine grind, polishing 3 kinds, use in turn can.
2, rough machining with diamond circular saw blade, and then with milling wheel finishing, polishing.This method is suitable for the wide or narrow shapes with large undulations.If the milling wheel directly processing wear, and with a high cutting efficiency of the circular saw blade to remove most of the surplus material, and then milling wheel coarse grinding, fine grinding, polishing.
3. Cut with diamond bead saw, and then go through copying machine polishing or manual polishing.This is suitable for the processing of relatively wide flower line, cutting can obtain concave, convex two kinds of flower line, if the design is good, two kinds of flower line can be used on a project, conducive to saving costs.